Cannot get TruHexen to boot up on Xbox consoles

Ok trying this again. I have 3 different xbox consoles. I tested and verified they disc drive works, I can put in any game and it loads up just fine. Right now I want to boot into TruHexen to try and restore the dashboard on one of the consoles.

So I downloaded TruHexen 2021 iso (I also tried 2019 with same issue) and burned it to a blank CD-R 4.7GB DVD disc at 4x speed. It only works at 4x and 8x, I chose the slowest. I am using imburn to burn the image. I tried 2 different disc brands, verbatim with azo dye and maxell. Whatever disc I burn, my xbox will not boot off of. I put the disc into the drive, turn it off, then back on, you can feel the drive spin up and you can hear it going.

It sits at the initial xbox boot up screen for about 10-15 seconds, then the microsoft logo shows and it goes to the dashboard with the message xbox cant recognize the disc. I tried different disk drives, different IDE cables, different xbox consoles. All the same issue. The disc drive brands are Samsung, Thompson and philips.

Again, I can put a game into the same disc drives and they load just fine. What am I doing wrong? Is the CD-R discs too new? I bought them the other day. I also have a brand new LG external CD disc writer as the one in my computer does not read CD-R's. What am I doing wrong?

BTW the one disc drive I know that fully works is a Samsung SDG-605B (Ver. B)