Why my Y axis could be misaligned ENDER 5 PRO

I just added a Markforged Hybrid Core XY from endorphine 3d on a ender 5 pro and maybe someone has a suggestion about or if someone has built it. I have been finding some trouble on Y axis movement, for now I have been testing the calibration cube.

The GT2 belt of 6mm on every axis are new.

When printing, it starts to make a click sound like missteps, and I think it causes jumps on X+Y axis while printing, I added the photo of the cube calibration misalignments, when I try to add some tension to the Y axis from that side (mods), as the deviation of the cube gets worse, and when I make loose of the Y axis of the side where the mods are, the sound when clicking is lowering, anyway there is always a deviation.

I got a little deviation too on the gantry of the wheels, I thought I already fixed it but it seems like it moved again...(One of the V-Wheel rollers makes contact with the aluminium sthe one that doesn't make contact is the one of the side of the printed mods, the contact just happens when I manually move it, so never makes contact when sending commands).

Helped me by a moment to tight and adjust the gantry of the V Wheels, and using that aluminum profile as guide, but still like the problem is still there even when the clicking sound went down