crwdns2934065:0crwdne2934065:0: 37
2
1
Hi all,
I just replaced my LCD and when I boot up my phone the display seems to work but after 1 or 2 seconds the backlight shuts off. The screen is fully functional; touch works as well as the pixels. I can only see the pixels by holding the screen at a 45 degree angle while shining a flashlight.
Any solutions? Did I connect anything wrong?
crwdns2934109:0crwdne2934109:0
crwdns2934065:0crwdne2934065:0: 159.8crwdns2936485:0crwdne2936485:0
11
191
368
I've had a very similar symptom happen on an iPad 2 for example.
I fixed it by cleaning the screen connector on the board with a soft bristle brush and 99% isopropyl alcohol, wasn't making a full connection so backlight would shut off because it couldn't get full power.
crwdns2934105:0crwdne2934105:0
That doesn't seem to work. Also I forgot to mention that the backlight of the broken screen is working when I try that one.
crwdns2934065:0crwdne2934065:0: 13
1
Found out that one pin was stuck in the motherboard connector. It was not making contact with display connector.
Check the pins under the microscope.
crwdns2934105:0crwdne2934105:0
crwdns2936751:024crwdne2936751:0 2
crwdns2936753:07crwdne2936753:0 4
crwdns2936753:030crwdne2936753:0 13
crwdns2942667:0crwdne2942667:0 1,490
crwdns2942205:01crwdne2942205:0
Hey, have you found the solution. I have the same problem. It works just with original display and no other.
crwdns2934271:0crwdnd2934271:0 Doom Bass crwdne2934271:0