Ups not charging the battery
My ups is not charging. The problem is not of battery, what else should I check in the circuit.
crwdns2934109:0crwdne2934109:0
My ups is not charging. The problem is not of battery, what else should I check in the circuit.
crwdns2934109:0crwdne2934109:0
These things usually have two batteries and usually one will fail before the other. Look at the diagnostics lights on it and tell us what you see.
crwdns2934105:0crwdne2934105:0
the green light is not stable. It comes on, and goes off immediately
This is not a solution, and not helpful.
When I plug it not show any indicator
This is not a solution
To test your unit charging capabilities, you can unplug your battery pack and put a DVOM on the outputs. You should see 24V+.
I as well have a Cyberpower, a couple of them actually. Batteries are dead but the unit says fully charged. Even with the batteries pulled out. I'm converting mine into solar generators, but I'm glad I tested these units out without plugging in expensive electronics. You know, the ones they're supposed to help save.
crwdns2934105:0crwdne2934105:0
Just did that! i got 13.87V on my outputs (1000PFCLCD). With the UPS switched on, and switched off.
I also noticed that with the UPS switched on, it turns on fine and shows a full battery. WITH THE BATTERY REMOVED! LOL. It doesn't even know there's not a battery there. I'm guessing that's related to the issue at hand.
Long out of warranty though.
I have the same issue. CyberPower replaced my battery because I thought that was initially the problem. The replacement battery came charged, but ran down and isn't charging. It seems like the unit itself isn't charging the batteries.
GS1500U 1. Bought 2 new batteries 2. The new batteries discharged to 0% 3. Reveived 2 more new batteries with 93% charge leaving the store 4. Hot home plugged it in to see if it would charge 5. It began to discharge from 93% to 84% 6. I let it run plugged into the wall with nothing plugged into it. 7. Awoke this morning to a 16% charge 8. That is a discharge from 93% to 16% in less than 24 hours with nothing plugged INTO the GS1500U. Any advice is appreciated to fix this.
Thank You
Did you find a fix for this as I am having that same problem?
@danielaleburgess have you chek the voltage battery ? let me show you how to chek
look up “cyberpower yellow glue of death”.
Mine just died as well, I took it apart, and verified that it was indeed the yellow glue of death
CyberPower CP1500PFCLCD 1500VA
Supposedly they have stopped using the glue in the newest version models
crwdns2934105:0crwdne2934105:0
I've had THREE of the 1500va models fail on me in the same way, batteries are not the problem, the unit is.
Poorly made, I won't be recommending them to my clients or buying them anymore.
My ups 24 vots is not changing but is showing on what is the problem
crwdns2934105:0crwdne2934105:0
My ups 24 vots is not changing but is showing on what is the problem
crwdns2936751:024crwdne2936751:0 7
crwdns2936753:07crwdne2936753:0 39
crwdns2936753:030crwdne2936753:0 287
crwdns2942667:0crwdne2942667:0 144,721
crwdns2944067:013crwdne2944067:0
which model is your UPS?
Had you removed the battery and test with a multimeter?
crwdns2934271:0crwdnd2934271:0 Augustine crwdne2934271:0
I have also a UPS which is not charging when i switch on power supply it show that your battery is full but actually it is empty....what is the problem and what i should to do for fixing this problem...?
crwdns2934271:0crwdnd2934271:0 Khalilullah Balouch crwdne2934271:0
You can check your issues on Power Calculator by MSP Web Store. It will help you know your UPS
crwdns2934271:0crwdnd2934271:0 Alan S crwdne2934271:0
my UPS always alarming and it says i need to replace my battery even though my battery is new one.
crwdns2934271:0crwdnd2934271:0 Papa Boknoy crwdne2934271:0
@Papa Boknoy what make and model is your UPS? When did you replace the battery? What have you checked?
crwdns2934271:0crwdnd2934271:0 oldturkey03 crwdne2934271:0
crwdns2934275:08crwdne2934275:0