crwdns2934065:0crwdne2934065:0: 25
1
1
So when i start my computer it has a black screen and beeps, its 3 beeps followed by another 3 then followed by 1. I suppose its like a RAM issue from what ive read but i dont know if the solutions apply to my computer. Its my school comp btw so need it fixed ASAP :) (not very technical)
crwdns2934109:0crwdne2934109:0
crwdns2934065:0crwdne2934065:0: 101,2crwdns2936485:0crwdne2936485:0
8
172
358
Trak, you can try reseating(remove and reinsert in case of bad connection) the Ram/memory in your computer to see if that fixes the fault your having. I will post a link on how you access the Ram/memory to enable you to try this. Good luck .
I hope this helped you out, if so let me know by pressing the helpful button.
crwdns2934105:0crwdne2934105:0
I'm having the same issue as the original post but it happens after i try and install a new trackpad. The error only happens while the trackpad is plugged in though
Have you tried resetting the BIOS?
I have not. I'm not entirely sure how to reset the BIOS from a black screen, or if resetting it would work before putting the trackpad back in
Take out main battery. Discharge power by pressing On/Off button. Open case and unplug the CMOS (they call it "backup battery here). Here's the diagram from the manual.
https://support.lenovo.com/nz/en/solutio...
or download entire manual:
I tried everything for the above comments and my screen remain black and the beeping continues. The power light flash and the "caps lock" light is on. I don't know how to fix this. Please give light
crwdns2934065:0crwdne2934065:0: 10,3crwdns2936485:0crwdne2936485:0
15
29
6
This should be a question but https://support.lenovo.com/us/en/solutio... those are all the codes
crwdns2934105:0crwdne2934105:0
John hall is right about the track pad wire my track pad comes off easily and is snapped off the wire. I tucked the wire into the laptop and it started touching something I’m guessing metal which caused it to short circuit I think. I just had the get out the wire.
crwdns2934105:0crwdne2934105:0
I have a Lenovo X1 Extreme Gen 1.
Got the 0282 beep. Memory module or system board error. I tried swapping out the memory didn't work. System board was above my pay grade. I'm glad I found this thread because I disconnected the touchpad and it works now. Thanks John Hall et al.
crwdns2934105:0crwdne2934105:0
crwdns2936751:024crwdne2936751:0 17
crwdns2936753:07crwdne2936753:0 95
crwdns2936753:030crwdne2936753:0 487
crwdns2942667:0crwdne2942667:0 64,976
crwdns2942205:01crwdne2942205:0
2 beeps pause 1 beep then repeats
crwdns2934271:0crwdnd2934271:0 David M Roettgen crwdne2934271:0