using the system without the display does create some issues which you need to either over come or just find a good display assembly even if it’s not perfect.
+
Using the system without the display does create some issues which you need to either overcome or just find a good display assembly even if it’s not perfect.
As far as the antennas they are held along the back edge, here’s a deeper view [guide|133429]
The SMC logic depends on voltage and thermal sensors if you leave them dangling SMC gets upset and will put the system into CPU Safe Mode, lowering the CPU’s clocking and in some models ramp up the fan’s RPM.
-
The next issue is the display sensor which is a Hall sensor meeting up with a magnet in the lid. Without the magnet the system will always be running will take much longer going to deep sleep as it still thinks the display is active. If you are running on battery that will shorten its run time.
+
The next issue is the display sensor which is a Hall sensor meeting up with a magnet in the lid. Without the magnet the system will always be running and will take much longer going to deep sleep as it still thinks the display is active. If you are running on battery that will shorten its run time.
using the system without the display does create some issues which you need to either over come or just find a good display assembly even if it’s not perfect.
As far as the antennas they are held along the back edge, here’s a deeper view [guide|133429]
The SMC logic depends on voltage and thermal sensors if you leave them dangling SMC gets upset and will put the system into CPU Safe Mode, lowering the CPU’s clocking and in some models ramp up the fan’s RPM.
The next issue is the display sensor which is a Hall sensor meeting up with a magnet in the lid. Without the magnet the system will always be running will take much longer going to deep sleep as it still thinks the display is active. If you are running on battery that will shorten its run time.