Hi, my iMac mid 2010 wont boot I was changing the SSD cable on my system. Everything was OK. Had no issues beside the SSD cable broken after replacement.
Took out the logic board for better access so I wont damage the mother board And now After reassembling my iMac won't boot.
The screen is black, when I plug it into the wall without me pushing the power button it automatically turns on, then after 20 seconds or so, if i hold the power button for 15 seconds it will shut off The diagnostic lights 1 and 2 light up on the logic board fans run
But the third one won't light up and screen is black or wont chime or boot. I know the third light on the logic board is for graphic card or suggests that the logic board has issues But I'm 100 percent sure there is nothing wrong with graphics card and logicboard
My ram is OK & my cpu is OK, I've done SMC reset, Changed the PRAM battery
PRAM/NVRAM has been reseted, basically everything that i have read so far on any forum has been done on it. I haven't seen a single person with my issue. Either they don't have any Diagnostic LED's on At least they hear the chime
Plz help me I'm at the point of giving up on this iMac
Took out the logicboard for better access so i wont damage the mother board
-
And now
-
After reassembling my imac wont boot
-
The screen is black
-
When i plug the it to the wall without me pushing the power button it automatically turns on
-
And after 20 seconds or so if i hold the power button for 15 seconds it will shut off
-
The diagnostic lights 1 and 2 light up on the logicboard fans run
-
But the third one wont
-
And screen is black
-
It wont chime or boot
-
And i know the third light on the logicboard is for graphic card or suggests that the logicboard has issues
-
But im 100 percent sure there is nothing wrong with graphics card and logicboard
-
My ram is ok
-
My cpu is ok
-
Ive done smc reset
-
Changed the pram battrey
-
Pram and nvram has bee reseted
-
Basically everything that i have. Read so far on any fourm has been done on it
-
And i havent seen a single person with mu issue
-
Either they dont have any light on
-
At least they hear the chime
+
Hi, my iMac mid 2010 wont boot I was changing the SSD cable on my system. Everything was OK. Had no issues beside the SSD cable broken after replacement.
-
Plz help me
-
Im at the point of giving up on this imac
-
[/code]
+
Took out the logic board for better access so I wont damage the mother board And now After reassembling my iMac won't boot.
+
+
The screen is black, when I plug it into the wall without me pushing the power button it automatically turns on, then after 20 seconds or so, if i hold the power button for 15 seconds it will shut off The diagnostic lights 1 and 2 light up on the logic board fans run
+
+
But the third one won't light up and screen is black or wont chime or boot. I know the third light on the logic board is for graphic card or suggests that the logic board has issues But I'm 100 percent sure there is nothing wrong with graphics card and logicboard
+
+
My ram is OK & my cpu is OK, I've done SMC reset, Changed the PRAM battery
+
+
PRAM/NVRAM has been reseted, basically everything that i have read so far on any forum has been done on it. I haven't seen a single person with my issue. Either they don't have any Diagnostic LED's on At least they hear the chime
+
+
Plz help me I'm at the point of giving up on this iMac
[code]
Hi my imac mid 2010 wont boot
I was changing the ssd cable on my imac
Everythin was ok
Had no issues beside the ssd cable broken
Adter replacemmet
Took out the logicboard for better access so i wont damage the mother board
And now
After reassembling my imac wont boot
The screen is black
When i plug the it to the wall without me pushing the power button it automatically turns on
And after 20 seconds or so if i hold the power button for 15 seconds it will shut off
The diagnostic lights 1 and 2 light up on the logicboard fans run
But the third one wont
And screen is black
It wont chime or boot
And i know the third light on the logicboard is for graphic card or suggests that the logicboard has issues
But im 100 percent sure there is nothing wrong with graphics card and logicboard
My ram is ok
My cpu is ok
Ive done smc reset
Changed the pram battrey
Pram and nvram has bee reseted
Basically everything that i have. Read so far on any fourm has been done on it
And i havent seen a single person with mu issue
Either they dont have any light on
At least they hear the chime
Plz help me
Im at the point of giving up on this imac
[/code]