This was a common issue in this series. The polycarbonate case often cracks at sharp inside corners like this. Using some 95% or better isopropyl alcohol flush out the gap of any junk using a syringe with a small needle and a few short blasts of can’ed air. Then use [https://www.homedepot.com/p/DAP-RapidFuse-0-85-oz-Clear-All-Purpose-Adhesive-01555/206767140?|DAP-RapidFuse Clear All Purpose Adhesive] should be enough to hold things. Make sure you have a way to press the two sides together once you get the glue in (move quickly) Don’t touch the area and hand holding is not good enough.
+
This was a common issue in this series. The polycarbonate case often cracks at sharp inside corners like this.
+
+
Using some 95% or better isopropyl alcohol flush out the gap of any junk using a syringe with a small needle and a few short blasts of can’ed air. Then use [link|https://www.homedepot.com/p/DAP-RapidFuse-0-85-oz-Clear-All-Purpose-Adhesive-01555/206767140?|DAP-RapidFuse Clear All Purpose Adhesive] should be enough to hold things. Make sure you have a way to press the two sides together once you get the glue in (move quickly) Don’t touch the area and hand holding is not good enough.
This was a common issue in this series. The polycarbonate case often cracks at sharp inside corners like this. Using some 95% or better isopropyl alcohol flush out the gap of any junk using a syringe with a small needle and a few short blasts of can’ed air. Then use [https://www.homedepot.com/p/DAP-RapidFuse-0-85-oz-Clear-All-Purpose-Adhesive-01555/206767140?|DAP-RapidFuse Clear All Purpose Adhesive] should be enough to hold things. Make sure you have a way to press the two sides together once you get the glue in (move quickly) Don’t touch the area and hand holding is not good enough.