Tv plugged into wall and the power button on the remote pressed. It results in a blinking LG logo (Not on the screen, Basically the standby light).
Ive replaced the caps shown in the photo apart from one that I circuled in red (Didnt have the size to hand) and still no luck with it turning on (The old caps didnt look to bad).
You can hear a very slight whine each time the led flashes, But when the logo is blinking if you take out the power lead it continues to flash. You can even wait until it stops blinking and start it blinking again with the power removed, I think this would indicate that no real power is being drawn by the screen.
Hi I have an LG 55EG960V that will not turn on.
Tv plugged into wall and the power button on the remote pressed. It results in a blinking LG logo (Not on the screen, Basically the standby light).
Ive replaced the caps shown in the photo apart from one that I circuled in red (Didnt have the size to hand) and still no luck with it turning on (The old caps didnt look to bad).
You can hear a very slight whine each time the led flashes, But when the logo is blinking if you take out the power lead it continues to flash. You can even wait until it stops blinking and start it blinking again with the power removed, I think this would indicate that no real power is being drawn by the screen.
Where should I start next?
Cheers[br]
Ryan