The golden rules, when taking appart the screen: 1/ never go deeper, with the cutting tool, than 7.5 millimiters (al around the screen). 2/ Never pry (the cutting tool should always be parallel to the screen glass). 3/You should cut the ribon in every place, all around the screen. 4/ Once all the ribon is cut, put some tape on top of the screen, to avoid it falling. 5/ Work on a soft surface, like above towels or something similar, just in case the screen falls. 6/ And, finally, whenever posible, work with the machine lying down (and not upright), as you will reduce the chances of the screen falling off.
+
The golden rules, when taking the display off:
+
+
# Never go deeper, with the cutting tool, than 7.5 millimiters (al around the screen).
+
# Never pry (the cutting tool should always be parallel to the screen glass).
+
# You should cut the ribon in every place, all around the screen.
+
# Once all the ribon is cut, put some tape on top of the screen, to avoid it falling.
+
# Work on a soft surface, like above towels or something similar, just in case the screen falls.
+
And, finally, whenever posible, work with the machine lying down (and not upright), as you will reduce the chances of the screen falling off.
The golden rules, when taking appart the screen: 1/ never go deeper, with the cutting tool, than 7.5 millimiters (al around the screen). 2/ Never pry (the cutting tool should always be parallel to the screen glass). 3/You should cut the ribon in every place, all around the screen. 4/ Once all the ribon is cut, put some tape on top of the screen, to avoid it falling. 5/ Work on a soft surface, like above towels or something similar, just in case the screen falls. 6/ And, finally, whenever posible, work with the machine lying down (and not upright), as you will reduce the chances of the screen falling off.