I have an issue with a 2018 13” MacBook Pro reporting it needs a new battery
* Battery condition: replace now
* Cycle count 2
* Charge remaining (mAh) 0
* Full charge capacity (mAh) 5169
* Amperage (mA) 0
* Voltage (mV) 4330,
-
Battery is not charging! Does any one know how to solve this ?
Is there a way to charge the battery discgnected from the mainboard? Like jump start
I think that the battery is under the charging designated voltage and the MacBook does not charge it due to this low voltage.
The laptop is new, was not used from 2018!
Tried SMC reset and it does not work
thank u
=== Update (03/29/2020) ===
-
-
i will ask take it to apple store to see if they can change the battery . the laptop had not been used from 2018 …
+
i will ask / take it to apple store to see if they can change the battery . the laptop had not been used from 2018 …
i have opened it yesterday . checked the logs… and last time this laptop booted was in december 2018 . meaning that it was activated back then so i fear that it has no warranty left.
it tought that i can charge it on those + - pins on the battery board.
I have an issue with a 2018 13” MacBook Pro reporting it needs a new battery
* Battery condition: replace now
* Cycle count 2
* Charge remaining (mAh) 0
* Full charge capacity (mAh) 5169
* Amperage (mA) 0
* Voltage (mV) 4330,
+
Battery is not charging! Does any one know how to solve this ?
Is there a way to charge the battery discgnected from the mainboard? Like jump start
I think that the battery is under the charging designated voltage and the MacBook does not charge it due to this low voltage.
The laptop is new, was not used from 2018!
Tried SMC reset and it does not work
thank u
+
+
=== Update (03/29/2020) ===
+
+
i will ask take it to apple store to see if they can change the battery . the laptop had not been used from 2018 …
+
+
i have opened it yesterday . checked the logs… and last time this laptop booted was in december 2018 . meaning that it was activated back then so i fear that it has no warranty left.
+
+
it tought that i can charge it on those + - pins on the battery board.
hy
i have an issue with a macbook pro 13 2018
battery condition: replace now
cycle count 2
charge remaining (mAh) 0
full charge capacity (mAh) 5169
amperage (mA) 0
voltage (mV) 4330,
battery is not charging
does any one know how to solve this ?
is there a way to charge the battery disconected from the mainboard? like jump start
i think that the battery is under the charging designated voltage and the macbook does not charge it due to this low voltage.
the laptop is new , was not used from 2018!
tried smc resset and it does not work
thank u