Can you post a picture so we can see what you encountered. I'm not sure you encountered the FlexGate issue here. [guide|21499]
It sounds like you might have a bad display assembly with the displays data lines. FlexGate only effects the power lines of the backlight which sits at the bottom edge of the display. Here’s a picture showing the effect:
[image|1844193]
-
Each light burst you see along the bottom is a working LED group and the gaps between is a group with is not getting power.
+
Each light burst you see along the bottom is a working LED group and the gaps between is a group is not getting power.
What I think you are describing is the screen washes out so the whole screen goes white (sometimes is only a side (left or right or top or bottom).
Here’s a good view of the connections to the T-CON board from the display. Here one of the Purple cables is not properly attached to the T-CON board and/or one of the ribbon cables is damaged.
Can you post a picture so we can see what you encountered. I'm not sure you encountered the flexGate issue here. [guide|21499]
+
Can you post a picture so we can see what you encountered. I'm not sure you encountered the FlexGate issue here. [guide|21499]
It sounds like you might have a bad display assembly with the displays data lines. FlexGate only effects the power lines of the backlight which sits at the bottom edge of the display. Here’s a picture showing the effect:
[image|1844193]
Each light burst you see along the bottom is a working LED group and the gaps between is a group with is not getting power.
What I think you are describing is the screen washes out so the whole screen goes white (sometimes is only a side (left or right or top or bottom).
Here’s a good view of the connections to the T-CON board from the display. Here one of the Purple cables is not properly attached to the T-CON board and/or one of the ribbon cables is damaged.
Can you post a picture so we can see what you encountered. I'm not sure you encountered the flexGate issue here. [guide|21499]
It sounds like you might have a bad display assembly with the displays data lines. FlexGate only effects the power lines of the backlight which sits at the bottom edge of the display. Here’s a picture showing the effect:
[image|1844193]
-
Each light burst you see alone the bottom is a working LED group and the gaps between is a group with is not getting power.
+
Each light burst you see along the bottom is a working LED group and the gaps between is a group with is not getting power.
What I think you are describing is the screen washes out so the whole screen goes white (sometimes is only a side (left or right or top or bottom).
Here’s a good view of the connections to the T-CON board from the display. Here one of the Purple cables is not properly attached to the T-CON board and/or one of the ribbon cables is damaged.
Can you post a picture so we can see what you encountered. I'm not sure you encountered the fluxgate issue here. [guide|21499]
+
Can you post a picture so we can see what you encountered. I'm not sure you encountered the flexGate issue here. [guide|21499]
It sounds like you might have a bad display assembly with the displays data lines. FlexGate only effects the power lines of the backlight which sits at the bottom edge of the display. Here’s a picture showing the effect:
[image|1844193]
Each light burst you see alone the bottom is a working LED group and the gaps between is a group with is not getting power.
What I think you are describing is the screen washes out so the whole screen goes white (sometimes is only a side (left or right or top or bottom).
+
+
Here’s a good view of the connections to the T-CON board from the display. Here one of the Purple cables is not properly attached to the T-CON board and/or one of the ribbon cables is damaged.
Can you post a picture so we can see what you encountered. I'm not sure you encountered the fluxgate issue here. [guide|21499]
It sounds like you might have a bad display assembly with the displays data lines. FlexGate only effects the power lines of the backlight which sits at the bottom edge of the display. Here’s a picture showing the effect:
[image|1844193]
Each light burst you see alone the bottom is a working LED group and the gaps between is a group with is not getting power.
What I think you are describing is the screen washes out so the whole screen goes white (sometimes is only a side (left or right or top or bottom).