I am following iFixit repair guide for replacement of upper case for this
+
I am following iFixit repair guide for replacement of upper case for this machine. I am at the point (step 24 and 25) in [guide|1587]
-
machine. I am at the point (step 24 and 25)
+
The logic board is loose but something underneath it is holding the logic board from lifting enough to get at the microphone loose.
-
[guide|1587]
-
-
The logic board is loose but something underneith it is holding the
-
-
logic board from lifting enough to get at the microphone loose.
-
-
But the point that is stuck is right near ports between RJ-45 and
-
-
USB port. I don’t want to break the board by applying too much
-
-
force to pry it out.
-
-
Is there anything else I should be aware of that isn’t in this repair guide?
+
But the point that is stuck is right near ports between RJ-45 and USB port. I don’t want to break the board by applying too much force to pry it out. Is there anything else I should be aware of that isn’t in this repair guide?
I am following iFixit repair guide for replacement of upper case for this
machine. I am at the point (step 24 and 25)
[guide|1587]
The logic board is loose but something underneith it is holding the
logic board from lifting enough to get at the microphone loose.
But the point that is stuck is right near ports between RJ-45 and
USB port. I don’t want to break the board by applying too much
force to pry it out.
Is there anything else I should be aware of that isn’t in this repair guide?
Thank you;
JK
I am following iFixit repair guide for replacement of upper case for this
machine. I am at the point (step 24 and 25)
[guide|1587]
The logic board is loose but something underneith it is holding the
logic board from lifting enough to get at the microphone loose.
But the point that is stuck is right near ports between RJ-45 and
USB port. I don’t want to break the board by applying too much
force to pry it out.
Is there anything else I should be aware of that isn’t in this repair guide?
Thank you;
JK