A hot plate would be too hot and not focused enough. All you’ll you do is damage the LCD from the excessive heat.
+
***A hot plate would be too hot and not focused enough. All you’ll you do is damage the LCD from the excessive heat.***
Use a heat gun or a hair dryer to soften the adhesive along the edges. Using the techniques outlined in this guide: [guide|110591] you should be able to lift the cover glass (if the cover glass is intact you can forgo the tape)
-
'''No solvents needed here!'''
+
***No solvents needed here!***
Wear eyeglasses with side shields and proper gloves.
A hot plate would be too hot and not focused enough. All you’ll you do is damage the LCD from the excessive heat.
Use a heat gun or a hair dryer to soften the adhesive along the edges. Using the techniques outlined in this guide: [guide|110591] you should be able to lift the cover glass (if the cover glass is intact you can forgo the tape)
'''No solvents needed here!'''
+
+
Wear eyeglasses with side shields and proper gloves.
A hot plate would be too hot and not focused enough. All you’ll you do is damage the LCD from the excessive heat.
Use a heat gun or a hair dryer to soften the adhesive along the edges. Using the techniques outlined in this guide: [guide|110591] you should be able to lift the cover glass (if the cover glass is intact you can forgo the tape)
'''No solvents needed here!'''