I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive.
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade] but only on the metal case side. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. I then go over the surfaces again with the same approach a fresh cloth strip using the isopropyl alcohol.
-
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
+
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position (on its back) for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive.
-
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade] but only on the metal case side. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. I then go over the surfaces again with the same approach a fresh strip using the isopropyl alcohol.
+
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade] but only on the metal case side. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. I then go over the surfaces again with the same approach a fresh cloth strip using the isopropyl alcohol.
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive.
-
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade]. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. I then go over the surfaces again with the same approach a fresh strip using the isopropyl alcohol.
+
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade] but only on the metal case side. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. I then go over the surfaces again with the same approach a fresh strip using the isopropyl alcohol.
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive.
-
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade]. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. I then go over the surfaces again with the same approach using the isopropyl alcohol.
+
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade]. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. I then go over the surfaces again with the same approach a fresh strip using the isopropyl alcohol.
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive.
-
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade]. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. This helps with the degreasing performance of this organically-based product. I then go over the surfaces again with the same approach using the isopropyl alcohol.
+
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade]. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. I then go over the surfaces again with the same approach using the isopropyl alcohol.
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive.
-
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade]. Which is based on a natural solvent from orange peel called d-limonene. This helps with the degreasing performance of this organically-based product.
+
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade]. I use a micro cloth strip wrapped over the blade which has been wetted with the Goof Off. Which is based on a natural solvent from orange peel called d-limonene. This helps with the degreasing performance of this organically-based product. I then go over the surfaces again with the same approach using the isopropyl alcohol.
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
-
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive. I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner. Which is based on a natural solvent from orange peel called d-limonene. This helps with the degreasing performance of this organically-based product.
+
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive.
+
+
I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner after scrapping the tape off using a [https://www.amazon.com/Mini-Scraper-2X-Plus-Plastic-Thicker/dp/B073X843MN/ref=asc_df_B073X843MN/|Plastic Razor Blade]. Which is based on a natural solvent from orange peel called d-limonene. This helps with the degreasing performance of this organically-based product.
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
-
I always use reagent quality isopropyl alcohol after I’ve used another solvent to remove the adhesive. I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner. Which is based on a natural solvent from orange peel called d-limonene. This helps with the degreasing performance of this organically-based product.
+
I always use reagent quality isopropyl alcohol 85% or better after I’ve used another solvent to remove the adhesive. I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner. Which is based on a natural solvent from orange peel called d-limonene. This helps with the degreasing performance of this organically-based product.
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
-
I always use reagent quality isopropyl alcohol after I’ve used another solvent to remove the adhesive. I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner. Which is based on a natural solvent from '''orange''' peel called d-limonene. This helps with the degreasing performance of this organically-based product.
+
I always use reagent quality isopropyl alcohol after I’ve used another solvent to remove the adhesive. I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner. Which is based on a natural solvent from orange peel called d-limonene. This helps with the degreasing performance of this organically-based product.
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol after I’ve used another solvent to remove the adhesive. I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner. Which is based on a natural solvent from '''orange''' peel called d-limonene. This helps with the degreasing performance of this organically-based product.
-
In addition I apply a bit pressure and heat to the edge after setting the glass. I use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller]
+
In addition I apply a bit pressure and mild heat to the edge after setting the glass. I also use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller] to help press the display into the tape I also leave the screen in the up position for the night so the weight of the screen is pressing down.
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol after I’ve used another solvent to remove the adhesive. I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner. Which is based on a natural solvent from '''orange''' peel called d-limonene. This helps with the degreasing performance of this organically-based product.
-
In addition I apply a bit pressure and heat to the edge after setting the glass. I use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/|rubber roller]
+
In addition I apply a bit pressure and heat to the edge after setting the glass. I use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/301664285?cm_mmc=Shopping%7CG%7CBase%7CD25T%7C25-1_HAND+TOOLS%7CNA%7CPLA|rubber roller]
I always use the cut strips and I don’t have displays falling off! I don’t recommend using Tesa tape which is great stuff but! Is not designed to be removable in the same way. The iMac tapes are designed so the pizza cutter is able to break the adhesion.
So why are you have a problem??
'''How you clean the surfaces is the key here!''' Rubbing alcohol or cheap isopropyl alcohol have impurities which leave a film on the surface which interferes with the adhesion!
I always use reagent quality isopropyl alcohol after I’ve used another solvent to remove the adhesive. I use [https://goofoffproducts.com|Goof Off] Or other Citrus oil based Cleaner. Which is based on a natural solvent from '''orange''' peel called d-limonene. This helps with the degreasing performance of this organically-based product.
In addition I apply a bit pressure and heat to the edge after setting the glass. I use a [https://www.homedepot.com/p/Bon-Tool-1-3-4-in-Silicone-Seam-Roller-19-195/|rubber roller]