crwdns2933423:0crwdne2933423:0
crwdns2918538:0crwdne2918538:0

crwdns2934243:0crwdne2934243:0 Dan

crwdns2934249:0crwdne2934249:0:

-You'll need to dig a bit deeper here. How about running the on board diagnostics to see what it shows for an error message. Or, you might want to see what your thermal sensors are telling you as well as how fast your fan is running. I would install this great app: [https://www.tunabellysoftware.com/tgpro/|TG Pro].
+Your battery needs replacing! Over 1000 cycles is beyond what it is able to work reliably.
+
+You'll need to dig a bit deeper here. How about running the on board diagnostics to see what it shows for an error message. Or, you might want to see what your thermal sensors are telling you as well as how fast your fan is running. I would install this great app: [link|https://www.tunabellysoftware.com/tgpro/|TG Pro].
Tell us the error message and/or paste a screenshot of the main window of TG Pro here for us to see.
References:
-* [https://support.apple.com/en-us/HT201255|Mac startup key combinations]
+* [link|https://support.apple.com/en-us/HT201255|Mac startup key combinations]
* [guide|21499]
-
=== Update (05/26/2018) ===
-
I would check to see if you have some corrosion damage around the SMC chip. You'll need to pull the logic board out to check the back side.
-I would run [https://www.coconut-flavour.com/coconutbattery/|CoconutBattery] to see how many cycles the battery has left. Some cells could be acting up causing the power to be off this can then mess up your system. I would replace the battery sooner than later as you don't want a swelling battery to distort or damage the trackpad and its cable.
+I would run [link|https://www.coconut-flavour.com/coconutbattery/|CoconutBattery] to see how many cycles the battery has left. Some cells could be acting up causing the power to be off this can then mess up your system. I would replace the battery sooner than later as you don't want a swelling battery to distort or damage the trackpad and its cable.

crwdns2915684:0crwdne2915684:0:

open

crwdns2934245:0crwdne2934245:0 Dan

crwdns2934249:0crwdne2934249:0:

You'll need to dig a bit deeper here. How about running the on board diagnostics to see what it shows for an error message. Or, you might want to see what your thermal sensors are telling you as well as how fast your fan is running. I would install this great app: [https://www.tunabellysoftware.com/tgpro/|TG Pro].
Tell us the error message and/or paste a screenshot of the main window of TG Pro here for us to see.
References:
* [https://support.apple.com/en-us/HT201255|Mac startup key combinations]
* [guide|21499]
=== Update (05/26/2018) ===
-I would check to see if you have some corrosion damage around the SMC chip. You'll need to pull the logic board out to check the back side.
+I would check to see if you have some corrosion damage around the SMC chip. You'll need to pull the logic board out to check the back side.
-I would run [https://www.coconut-flavour.com/coconutbattery/|CoconutBattery] to see how many cycles the battery has left. Some cells could be acting up causing the power to be off this can then mess up your system. I would replace the battery sooner than later as you don't want the swelling battery to distort or damage the trackpad and its cable.
+I would run [https://www.coconut-flavour.com/coconutbattery/|CoconutBattery] to see how many cycles the battery has left. Some cells could be acting up causing the power to be off this can then mess up your system. I would replace the battery sooner than later as you don't want a swelling battery to distort or damage the trackpad and its cable.

crwdns2915684:0crwdne2915684:0:

open

crwdns2934245:0crwdne2934245:0 Dan

crwdns2934249:0crwdne2934249:0:

You'll need to dig a bit deeper here. How about running the on board diagnostics to see what it shows for an error message. Or, you might want to see what your thermal sensors are telling you as well as how fast your fan is running. I would install this great app: [https://www.tunabellysoftware.com/tgpro/|TG Pro].
Tell us the error message and/or paste a screenshot of the main window of TG Pro here for us to see.
References:
* [https://support.apple.com/en-us/HT201255|Mac startup key combinations]
* [guide|21499]
+
+=== Update (05/26/2018) ===
+
+I would check to see if you have some corrosion damage around the SMC chip. You'll need to pull the logic board out to check the back side.
+
+I would run [https://www.coconut-flavour.com/coconutbattery/|CoconutBattery] to see how many cycles the battery has left. Some cells could be acting up causing the power to be off this can then mess up your system. I would replace the battery sooner than later as you don't want the swelling battery to distort or damage the trackpad and its cable.

crwdns2915684:0crwdne2915684:0:

open

crwdns2934241:0crwdne2934241:0 Dan

crwdns2934249:0crwdne2934249:0:

You'll need to dig a bit deeper here. How about running the on board diagnostics to see what it shows for an error message. Or, you might want to see what your thermal sensors are telling you as well as how fast your fan is running. I would install this great app: [https://www.tunabellysoftware.com/tgpro/|TG Pro].

Tell us the error message and/or paste a screenshot of the main window of TG Pro here for us to see.

References:

* [https://support.apple.com/en-us/HT201255|Mac startup key combinations]
* [guide|21499]

crwdns2915684:0crwdne2915684:0:

open