Put inside the old thermal connector (in case you will put again your old seagate hd)2 cables with connectors like these they use in windows pc's for microphone on motherboards and put
+
Put inside the old thermal connector (in case you will put again your old seagate hd) 2 cables with connectors like these they use in windows pc's for microphone on motherboards, put the black color on the first pin of WD hard disk closest to SATA connector
-
the black color on the first pin of wd hard disk closest to sata connector
+
In the lower (looking disc from above and connectors facing you) and the white colored cable next to black. Install fan control daemon and your finished.
-
in the lower(looking disc from aboveand conectors to face)and the white colored cable next to black.Install fan control daemon and you finish.
+
I played a lot with this and I find this is the best solution. Don't worry about hard disc, its running at most 37c without cooling.
-
i played a lot with this and i find this the best.
-
-
and dont worry about hard disc.is running in most 37c without cooling.
-
-
you can go then to fan settings and make them run as you wish.i have them in 2000 all.
+
You can go then to fan settings and make them run as you wish. I have them in 2000 RPM on all.
Put inside the old thermal connector (in case you will put again your old seagate hd)2 cables with connectors like these they use in windows pc's for microphone on motherboards and put
the black color on the first pin of wd hard disk closest to sata connector
in the lower(looking disc from aboveand conectors to face) and the white colored cable next to black.Install fan control daemon and you finish.
i played a lot with this and i find this the best.
and dont worry about hard disc.is running in most 37c without cooling.
you can go then to fan settings and make them run as you wish.i have them in 2000 all.