iFixit - Answers With Device "Robotic Vacuum Cleaner"

iRobot Roomba 655 Pet Series: Why will my Roomba not charge?

Mon, 27 Apr 2026 22:07:58 -0700

I placed my Roomba on the charging station and left it there overnight. The next morning I tried to run the Roomba through a cleaning cycle, and it gave a low battery signal.

⟐ Commented April 27, 2026 at 22:07 GMT-7

iRobot Roomba Essential Robot: Roomba Essential iRobot Model RVG Y1 No response from Power button

Mon, 27 Apr 2026 13:33:25 -0700

I have a Roomba Essential iRobot Model RVG Y1 that does not respond to to the power button. The power light flashes but anything that requires the button to be pressed, there is no response.

Roborock Qrevo S: roborock Qrevo S Robot Lidar error. Check that the turret turns freely

Sun, 26 Apr 2026 09:46:48 -0700

Does anyone have a guide on how to disassemble the Qrevo S?

Context:

My robot hasn't hit the year mark and yet he doth betray me with the Lidar error. I tried spinning the lidar with a cotton swab a few (15) times (it turns just fine), cleaning the area with a toothpick and vacuum, moving it, soft resetting it, hard resetting it and now I'm at a loss.

I followed this guide initially, but unfortunately it doesn't get me all the way to the turret motor in my model: https://www.reddit.com/r/Roborock/commen...

I have tried YouTube, google and am a hair's breadth away setting fire to my poor tool kit.

Any help or advice would be really appreciated.

⟐ Answered April 26, 2026 at 9:46 GMT-7

iRobot Roomba 650: Is there a filter

Wed, 22 Apr 2026 01:20:37 -0700

How to clean filter

⟐ Answered April 22, 2026 at 1:20 GMT-7

iRobot Roomba 5xx Series: Roomba keeps giving error 2 even when brushes are clean

Mon, 13 Apr 2026 08:33:07 -0700

have a 5xx ROOMBA keeps getting error 2 CLEAR BRUSHES. Brushes are clean and unie will work for maybe 10 - 15 minutes then get same message. when checking brushes they are clean. This keeps repeating.

⟐ Commented April 13, 2026 at 8:33 GMT-7

Narwal Freo Z10: Clean Water Tank Empty ... but it's NOT

Sun, 12 Apr 2026 07:59:47 -0700

We've had our Narwal Freo Z10 Ultra for about 6 months now. Love this thing! However, we seem to be having a recurring issue with the base station clean water tank. After filling the clean water tank and starting up, the narwal becomes angry from time to time and will say "fill clean water"... even though the tank is full and properly installed. My wife has found a temporary fix: using a baby medicine syringe to inject water into the base station clean water tank connection point. Doing this 3 or 4 times seems to clear up the issue... but a few days later same fault occurs. Anyone know of a root cause or complete fix?

Some things I have tried:

Cleaned both waste water and clean water tank thoroughly

Small pipe cleaner run through of all water lines to verify no obstructions

Thorough cleaning and maintenance of vacuum robot

This close to tearing the base station apart and doing a thorough cleaning.... when the wife isn't looking🫣

iRobot Roomba 650: side edge brush not spinning

Fri, 10 Apr 2026 05:39:34 -0700

new base board brush put on rumba 650 tested with battery it works will not work on rumba.

⟐ Commented April 10, 2026 at 5:39 GMT-7

ECOVACS DN622: Manual de usuario del Ecovacs Robot DN622

Thu, 09 Apr 2026 14:23:10 -0700

Manual de usuario del Ecovacs Robot DN622

Lefant m210: What is this foam rubber think in repair kit shaped like a boom-a-rang

Wed, 08 Apr 2026 10:41:05 -0700

what is this foam rubber think in repair kit shaped like a boom-a-rang

iRobot Roomba Combo J7: Camera lens is shattered and iRobot cannot proceed

Tue, 31 Mar 2026 21:47:07 -0700

Lens on camera is shattered. Can I replace it

And where do I order it

⟐ Answered März 31, 2026 at 21:47 GMT-7

ZCWA BR151: Can I only put water or can we add cleaning solution to water

Tue, 31 Mar 2026 11:00:53 -0700

Can I only put water in the water tank or can I add cleaning solution?

⟐ Answered März 31, 2026 at 11:00 GMT-7

Proscenic M8: The vacuum does not charge

Thu, 26 Mar 2026 16:30:05 -0700

Hi there!

The vacuum stopped charging. I have replaced the battery , and still is not charging. Is there anything I can do?

Thank you

Samsung Jet Bot VR30T80313W: Battery won't charge.

Mon, 23 Mar 2026 07:41:37 -0700

So I just got my robot vacuum back after lending it to my brother.

Turned out it stopped working a while ago.

When I got it back I started to diagnose it.

The first thing I noticed was, when it's docked in the charginstation, it turns on and I can adopt it into the smart things app. The battery read 0% and no matter how long it charges it wouldn't go up.

So I started by disassembling the battery down to its individual cells. Turned out 5 out if 6 cells were completely dead (absolute 0 volts).

So I ordered some new cells and put the battery back together. The battery now shows 21,7 volts. But it still doesn't want to run outside the chargingstation.

When I use a multimeter on the battery, while it's connected to the chargingstation it shows about 25 volts on d+ to d- (the plugs from the vacuum to the PCB on the battery). And still 21,7 volts on b+ to b- (the spot welded tin to the battery). It has now charged for about 2 hours and it's still about 37% charged (so not getting charged).

I've tried to put the PCB under an thermal camera to see if anything gets hot, but it doesn't. Even with it plugged into the chargingstation, without the chargingstation or it disconnected from the robot. I've also tried to connect 21 volts 1 a with a powersupply connected both on d+ to d- and on b+ to b-, yet nothing gets hot.

Anyone have any idea on how I could fix this?

I'm pretty new to this stuff, but I do watch some youtubers like NorthridgeFix and TronicFix so I have some general idea.

Should I disconnect the cells again and maybe try injecting voltage over some of the chips on the PCB or check the resistance on some of the caps? If so i would love some guidence. I don't have a chip programmer yet, but I will order one sooner or later, if needed.

Image of the PCB here:

https://imgur.com/a/eqJpynu

I'm also working on a guide on the disassembly of the batter here (ask and ill add you in order to view):

Disassembling Samsung Vacuum Battery VCA-RBT80 VR30T80313W/WA

⟐ Commented März 23, 2026 at 7:41 GMT-7

iRobot Braava 380t: Size Screws Needed To Attach The top Hard Cover to The vacuum

Sat, 21 Mar 2026 10:20:59 -0700

What size are the recessed screw that attach the outer cover to the Braava 380 to the remainder of the 380. They can be reached on the bottom side of the 380 with a screw just above each wheel and 2 additional screws just above the bar where the pad is attached.

eufy RoboVac G10HYBRID: How to fix a Eufy RoboVac G10 Hybrid that won’t charge and reports low

Sat, 14 Mar 2026 05:33:24 -0700

How can I fix a Eufy RoboVac G10 Hybrid that stopped charging suddenly?

The vacuum was working normally, but one day it stopped charging completely. When I press the reset button on the bottom, it powers on briefly and says the battery is low and needs to be charged. However, when placed on the charging dock, it does not start charging (no LED change and no charging indication).

What I have already checked:

The charging dock has power
The robot is correctly positioned on the dock
Charging contacts on the dock and the robot are clean
Tried multiple wall outlets

At this point, I would like to know how to repair it, not just identify the cause.

Questions:

What are the recommended repair steps to restore charging?
Is battery replacement usually the correct fix for this issue?
Are there known internal components (fuse, charging board, connector) that commonly fail?
What should be tested first after opening the robot?

Any step-by-step repair guidance would be appreciated.

Thank you.

⟐ Commented März 14, 2026 at 5:33 GMT-7

Shark Matrix RV2310: Why does my matrix vacuum make a loud growling noise?

Fri, 13 Mar 2026 17:55:09 -0700

Matrix robotic vacuum makes a loud growling noise while running. Will make less noise without the side brush on. Suspect it’s coming from the gears or motor that turns the sidewall brush.

⟐ Edited by author März 13, 2026 at 17:55 GMT-7

Wyze WVCR200s: Is the front wheel removable?

Fri, 06 Mar 2026 23:56:15 -0700

The front swivel-wheel on my Wyze has been getting clogged up with dust & debris over the years of my ownership.

Is it possible to detach it for a proper clean / replacement?

⟐ Answered März 06, 2026 at 23:56 GMT-7

iRobot Roomba i7: How to stop my i7 from spinning in circles in one place?

Thu, 05 Mar 2026 17:26:20 -0700

When I tell my i7 to vacuum, it comes off of the dock about 3 feet, and proceeds to just spin in circles. The wheels are clean, and the trash bin is empty. I'm not sure what else to try. Any help would be appreciated, we've only had this robot for 2 months.

⟐ Commented März 05, 2026 at 17:26 GMT-7

iRobot Roomba 561: Error 2 clean the brushes

Wed, 04 Mar 2026 08:01:27 -0700

My roomba moves for about a minute then says I need to clean the brushes. The brushes are clean. I’ve replaced all brushes and battery several times. I recently took the whole thing apart because of this error. I cleaned the fuzz around the motor and other places. I can’t tell if the brushes are spinning while it’s moving although it does sound different than normal. I thought this was because I cleaned around the motor. I can find parts on Amazon. Should I replace the green housing that the brushes sit in or should I replace the round sensor in the housing?

Ecovacs DEEBOT T30S Pro: Usterka zbiornika czystej wody

Wed, 25 Feb 2026 05:54:02 -0700

Usterka zbiornika czystej wody, nie można ponownie napełnić.

Awaria podczas uzupełniania zbiornika czystej wody. Sprawdź