crwdns2890332:0open surface pro and change ssd to 256gb ssdcrwdne2890332:0I have found that reheating and trying to reuse the old is useless. clean it, get a good 3m double sided adhesive strip set from ebay for like 14 bucks, and do it back together correctly. only way to solve future problems.
crwdns2890332:0Replacing the screen of the Surface Procrwdne2890332:0From my experience: Just recently I might add that I'm waiting for the last reheat of the glue to settle down. This is my first time doing a surface pro 64 1st edition. I replaced the crappy lite-on SSD they so injustly put in this surface, it lasted 14 months. yep, right past warranty. as usual. Heat gun on the screen, GENTLY, low heat, point the tip away from the center of the screen, never stay in the same place more than a second. your arms will get tired. it has to be hot, not searing hot, but not too easy to touch the glass before separation. start at the top corner, go across the top the the other corner. use good spudgy's, I bought a nice set of 5 metal ones from ebay for a few buck, along with a good metal separator with a very fine tip. SLOWLY work the edges, while heating at the same time to keep the warmth up on the surface. NEVER pry on the lower screen. as your separating the top just let the weight of the screen be the separator from the plastic by standing it on end, you will know when its...