crwdns2942213:0crwdne2942213:0
-
-
Teardown of Water Dancing Speaker
-
-
-
Remove 4 screws from rear of speaker
-
Peel back the rear half of the shell
-
Remove the Water/Pump Chamber
-
-
-
Remove 2 screws that hold the logic circuit in place
-
Carefully pull the logic board up, out of the plastic slot
-
-
-
-
Carefully pull the Lithium Ion Battery out of the plastic slot
-
-
-
Remove the 3 screws holding the speaker
-
Remove the speaker from the plastic shell
-
-
-
Disconnect the battery connector from the logic board
-
Disconnect the motor connector from the logic board
-
-
-
Disconnect the speaker connector from the logic board
-
Disconnect the LED connector from the logic board
-
-
-
Remove the 2 screws holding the motor mount on the water/pump chamber
-
Remove the motor mount from the water/pump chamber
-
Remove the 2 screws holding the LED board on the water/pump.
-
Remove the LED board from the water/pump
-
-
-
Teardown Finished
-
For Reassembly: Follow Guide in Reverse
-