crwdns2915892:0crwdne2915892:0
This guide will walk you through the steps to completely disassemble a Sprint Airave.
crwdns2942213:0crwdne2942213:0
-
-
Remove the external antenna, GPS cover, and GPS module.
-
-
-
Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.
-
-
-
Locate and remove the four Phillips screws
-
-
-
-
With the cover removed you now have access to the circuit board.
-
-
-
Using an 8mm socket you can remove the antenna pigtail.
-
-
-
Release the clip indicate to remove the circuit board.
-
-
-
Here is the circuit board fully removed.
-