crwdns2915892:0crwdne2915892:0
Alright. This guide is a teardown to show the safest and easiest way to take apart your genesis.
crwdns2942213:0crwdne2942213:0
-
-
Let's start by taking the small door found on the bottom right side of your console
-
-
-
Next, remove the four, black 11mm screws from the bottom of your console.
-
-
-
-
Carefully lift the top off of the console.
-
It should come off relatively easy
-
If it doesn't, ensure that all four screws are removed
-
-
-
Remove the six, gold, 8mm screws and the three, black, 8mm screws holding down the EM shield
-
After removing the screws, the shield will come off very easily.
-
-
-
Remove the two 17mm black screws on the left and right side of the PIN to release the circuit board from the bottom EM shield.
-
After the screws are releases, the circuit board can easily be removed from the console.
-
-
-
Well, there you have it!
-
One disassembled Sega Genesis. I hope this guide was helpful and informative. Good luck and Happy Gaming!
-
This guide brought to you by: Frankie's Video Game Console Repair and iFixit.
-
