crwdns2915892:0crwdne2915892:0
Follow this guide to completely disassemble your Palm IIIc.
crwdns2942213:0crwdne2942213:0
-
-
Keep track of all pieces removed from the device.
-
Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device
-
-
-
Using a Phillips head screwdriver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.
-
-
-
Using a spudger, carefully pry open the front and back covers along the side seam.
-
-
-
Unhook battery cable from the motherboard and remove the battery.
-
-
-
-
Behind the motherboard remove the brown plastic clamp and remove the front screen cover.
-
-
-
Unhook the blue and red screen cables.
-
-
-
Pop out the other two brown plastic clamps to release the screen and buttons.
-
-
-
The black clips on the edges of the device (see picture) must be unclipped to remove the motherboard.
-
Carefully remove the motherboard from the device, pulling the motherboard away from the clips.
-
-
-
The object is now fully disassembled.
-