crwdns2894164:0crwdne2894164:0

crwdns2881977:0crwdne2881977:0

crwdns2886882:0crwdnd2886882:0crwdne2886882:0 crwdns2886883:0Logitech K700 Keyboardcrwdnd2886883:0crwdnd2886883:0crwdne2886883:0

  1. Logitech K700 Keyboard Teardown, Logitech K700 Keyboard Teardown: step 1, image 1 of 1
    • Turn the keyboard over and slide the battery cover in the direction of the arrows slightly, and then lift the cover away.

  2. Logitech K700 Keyboard Teardown: step 2, image 1 of 1
    • Remove the batteries and the two screws shown.

  3. Logitech K700 Keyboard Teardown: step 3, image 1 of 1
    • Use a thumbnail or a pick to separate the clips around the periphery between the black and white plastic parts.

    • There are 4 clips on the top, 2 on either side, and 5 along the bottom. If you do the sides and top first, the bottom should slide out.

    • Don't separate the top and bottom immediately, since there are a couple of cables (near the touch pad) that connect between the two.

  4. Logitech K700 Keyboard Teardown: step 4, image 1 of 1
    • The smaller of the two cables is for the touchpad. Lift the catch on its connector in order to slide it out.

    • The larger cable is for the key matrix. Just pull it out from the connector (friction fit).

    • This is as far as you can easily disassemble the keyboard. To go further requires removing 12 screws and 35 plastic rivets. This is not recommended.

    • To clean the keyboard of liquid, I suggest holding it over a sink with the touchpad side up, then spraying plenty of isopropyl alcohol from the back, avoiding the touch-pad area (you may wish to mask it off). Let dry completely before reassembling.

    • If keys still do not function after cleaning, then it is possible that traces on the key matrix have become corroded. This is not repairable, since the key matrix is a sealed unit. It consists of 3 layers of plastic that are sealed together. Unfortunately, it is not 100% sealed to prevent entry of liquids.

  5. Logitech K700 Keyboard Teardown: step 5, image 1 of 1
    • Should you go further and remove the 12 screws and 35 plastic rivets, you can see this.

  6. Logitech K700 Keyboard Teardown: step 6, image 1 of 1
    • The keys can be popped out easily enough by pushing from the back side. This exposes the key matrix.

  7. Logitech K700 Keyboard Teardown: step 7, image 1 of 1
    • Here is the key matrix in all its glory.

cityzen

crwdns2886885:003/05/2010crwdne2886885:0

4,057 crwdns2915208:0crwdne2915208:0

crwdns2886889:02crwdne2886889:0

crwdns2917036:03crwdne2917036:0

Very helpful! I combined this and cleaning the battery compartments with a white vinegar drenched Q-Tip to clean out some old battery corrosion, and now it turns on!

mpeterfin - crwdns2853112:0crwdne2853112:0

any way you could send me a pic of the backside of the battery cover? i’d like to try to recreate it with a 3d printer

Cody Nelson - crwdns2853112:0crwdne2853112:0

crwdns2917038:0crwdne2917038:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 3

crwdns2894768:07crwdne2894768:0 14

crwdns2894768:030crwdne2894768:0 63

crwdns2894770:0crwdne2894770:0 14,499