crwdns2915892:0crwdne2915892:0
I found this device on the ground and decided to take it apart. These types of disposable devices are not made to be disassembled.
crwdns2942213:0crwdne2942213:0
-
-
The plastic shell is ultrasonically welded shut
-
I don't have images of the removal process but I used a razor to lightly go along the seam and then spit it apart with a spudger
-
-
-
Use the point part of the spudger to get under the port and pry it up
-
-
-
-
Remove the PH00 screw
-
-
-
Use the ponty end of the spudger to lift up the airflow sensor
-
-
-
Use flat end of spudger to pry out chamber
-
Everything should now be come out of the plastic housing
-
-
-
Some close up images of the PCB
-
-
-
Pull on the heater and it should just pop out
-
-
-
Use the spudger to pop off the rubber lid of the chamber
-
-
-
Pull out the foam-like material
-
-
-
Use spudger to push out core
-
crwdns2915084:0crwdne2915084:0
Repair For You crwdns2935289:0Repair For Youcrwdne2935289:0
Business
crwdns2934841:01crwdne2934841:0
crwdns2935297:011crwdne2935297:0
