crwdns2942213:0crwdne2942213:0
-
-
Use your iFixit Pro Tech Knife to slice and pry the different colored front and rear cases apart, as shown
-
-
-
Remove the logic board/display assembly from the rear case
-
-
-
-
Use your knife to slice off the bottom edge of the sticker found here on the rear of the board
-
-
-
Use a spudger to gently pry the display away from the logic board
-
Pry softly in each corner of the display, under the black frame
-
-
-
Seems to be it. The display doesn't appear to be separable from the logic board, sadly, making repairability completely out of the question.
I found a broken Zip on the ground and decided to open it up to see what's inside. The screen is attached via a Zero-Insertion-Force socket, so it should be replaceable. This may be a newer model, but the model number only reads "FB301"
-
crwdns2947412:02crwdne2947412:0
The display can be separated from the logic board, just pull it free from the logic board connector.
My fitbit zip came apart at the seams. I decided to go ahead and clean the screen off since it was coming apart already and the screen looked dusty. Any ideas on how to put it back together? I goes back together and when I hold it everything functions, but I can't get it to stay together. Silicone? Glue? Any suggestions?
