crwdns2915892:0crwdne2915892:0
This information will give you the understanding of how and what makes an ear bud work.
crwdns2942213:0crwdne2942213:0
-
-
As you can see this is your average ear bud, from these two pictures you can see the front and the back.
-
-
-
Take the silver covering off of the ear bud, notice the black wire connecting the two (the wire should be knotted)
-
-
-
Now detach the black shell completely.
-
-
-
Remove the black wire from the ear bud. Take the copper colored wire out of the black covering
-
-
-
-
This is what is inside the ear bud. You will see a silver ring surrounding the wires, and protecting cellophane around it.
-
-
-
On the ear bud you will see a magnet on the inside of the black encasing, Remove the Magnet from the encasing.
-
-
-
This is the copper band that was suronding the magnet.
-
-
-
This is the black ring that was around the magnet.
-
-
-
Take the ear bud, with the cellophane like wraping and remove the silver chip
-
-
-
This is were the magnet was and were the chip was attached too.
-
-
-
This is what the Finished product should look like. These are the things that you will find when you take apart you ear bud
-