crwdns2915892:0crwdne2915892:0
We are going to teach you how to take apart and put back together a Cannon Powershot N.
crwdns2942213:0crwdne2942213:0
-
-
Locate battery housing cover.
-
-
-
Place finger on the textured portion of battery housing cover and slide cover in the direction indicated.
-
-
-
Find beige tab and push it away from the battery.
-
-
-
Remove battery from battery slot with fingers.
-
-
-
Using a PH000 size screwdriver, unscrew four screws beneath screen.
-
-
-
Remove 2 screws on the bottom of the camera.
-
-
-
Remove 2 screws from the side of the camera with the on and off buttons.
-
-
-
-
Locate 2 screws on “on/off” side of the camera and unscrew them.
-
-
-
Locate 2 screws on the other side of the camera and remove them.
-
-
-
Remove one screw from the bottom of the camera.
-
-
-
Remove front plate from motherboard so that one ribbon cable is exposed.
-
-
-
Using plastic spudger, push tab to release the ribbon cable.
-
-
-
Locate screw under released ribbon cable and remove it.
-
-
-
With the camera lens facing you, remove 4 screws around the lens.
-
-
-
Flip over and remove 1 screw from side with playback/phone options .
-
-
-
Unscrew 2 screws from top, bottom, and both sides of screen.
-
-
-
Pull off white cap which edges the screen.
-
-
-
Remove white metal plate behind screen (tip: try not to bend).
-