crwdns2942213:0crwdne2942213:0
-
-
Loose pan lock
-
Rotate the base, expose and remove all 4 (four) M3 screws
-
Separate the base
-
-
-
Optional, Heat up here
-
Rotate the pan locking knob all the way out, remove the nut. (My screw is broken)
-
The threads on that screw are M5 and M4
-
-
-
Remove the locking ring
-
Remove ball locking plates.
-
-
-
Remove the cover by rotating it counterclockwise. You might need something to grab it, and/or soften the thread-lock by heating. I drilled 2 holes.
-
Them remove damp limiter screw, using a coin or fingernail.
-
-
-
-
Remove the clip
-
Remove washers
-
Pull off the knob
-
-
-
Turn it counterclockwise.
-
-
-
Heat this nut to ~ 150C, and remove it
-
I forgot to take photo of that.
-
-
-
forgot to take photos. just remove this thing
-
-
-
Remove the cap
-
unscrew
-
Pull and rotate to remove the knob
-
Then the ball is free. no photo here.
-
