crwdns2894164:0crwdne2894164:0

crwdns2886882:0crwdnd2886882:0crwdne2886882:0 crwdns2886883:0AWEI BT Earbudscrwdnd2886883:0crwdnd2886883:0crwdne2886883:0

  1. Remove Earbud Cushion Remove Earbud Cushion
    • Remove Earbud Cushion

  2. Secure Earbud End (eg:Vice)
    • Secure Earbud End (eg:Vice)

  3. Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm
    • Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm

  4. Inspect Earbud Wiring
    • Inspect Earbud Wiring

  5. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side.
    • Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side.

  6. Carefully Separate the PCB to inspect the headphone's left & right earbud wiring. Cleaned up any broken connections by de-soldering, re-tinning wires & re-soldering to the PCB. Each side is labeled L + L - and R + R - the colored wire is positive and the bare wire is negative. Assemble Unit in reverse order. Assemble Unit in reverse order.
    • Carefully Separate the PCB to inspect the headphone's left & right earbud wiring. Cleaned up any broken connections by de-soldering, re-tinning wires & re-soldering to the PCB. Each side is labeled L + L - and R + R - the colored wire is positive and the bare wire is negative.

    • Assemble Unit in reverse order.

fugitiveALiEN

crwdns2886885:028/02/2013crwdne2886885:0

163 crwdns2894548:0crwdne2894548:0

crwdns2882065:0crwdne2882065:0

crwdns2892814:0crwdne2892814:0

My Techno Guy crwdns2886886:0My Techno Guycrwdne2886886:0

Business

crwdns2858114:01crwdne2858114:0

crwdns2886891:01crwdne2886891:0

crwdns2892924:00crwdne2892924:0

crwdns2892926:0crwdne2892926:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 1

crwdns2894768:07crwdne2894768:0 5

crwdns2894768:030crwdne2894768:0 27

crwdns2894770:0crwdne2894770:0 790