Use a spudger to lift the corners of the silicone membrane under the device.

Unscrew the Phillips head screws using a PH000 screw bit.

Lift up the backplate.

Insert a plastic spudger into the highlighted notch in the motherboard.

Pull the motherboard up using the spudger.

Remove the motherboard, holding the corners.

Here's a list of chips present on the motherboard:

ITE IT6613 HDMI transmitter

ITE IT6604 single-link HDMI 1.4 receiver

Nanya NT6DM16M32BC-T1 mobile 512mb DDR RAM chip clocked at 200MHz

Sigma Designs PL330B-CPE3 H.264 Encoder

Texas Instruments LVC244A octal buffer/ driver

Nuvoton NUC100RD2BN RISC ARM microcontroller clocked at 50MHz