crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

iMac 27寸（2009年下半年至2010年款）显卡更换

crwdns2935421:0crwdne2935421:0

crwdns2935425:08crwdne2935425:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:08crwdne2931653:0
iMac Intel 27" (Late 2009 or Mid 2010) Graphics Card Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0

  • Reassemble the LCD display as explained on iFixit.

  • No other work needs to be done. As you removed the power cable the SMC should reset, which is the chip configuring your hardware.

  • If all goes well, you should be greeted with a welcome screen and "About This Mac" should show the image to the left.

  • Note: I also replaced the optical drive with a 256GB SSD, which can be done easily during the installation process.

  • Last tip: If you remove the optical drive for an SSD, make a minimal bootcamp partition and install Windows on it. It will save you a lot of trouble if you ever need one. Believe me, simply do it. Installing bootcamp with no optical drive is a pain.

按照ifixit指南操作重新安装LCD屏幕。

不需要再进行任何操作了。 当您卸下电源时，SMC应该重置。 配置硬件芯片

如果一切顺利，您应该看到欢迎界面，然后在关于本mac中应该和左图显示一致。

注意： 我将DVD驱动器替换成了256gb 的固态硬盘，这个也很容易安装。

最后的提示： 如果您想移走DVD驱动器来安装固态硬盘创建一个最小的bootcamp分区安装windows。 这个会为您避免很多的麻烦。 相信我，在没有DVD安装bootcamp会很痛苦。

-[* black] Reassemble the LCD display as explained on ifixit.
-[* black] No other work needs to be done. As you removed the power cable the SMC should reset, which is the chip configuring your hardware
-[* black] If all goes well you should be greeted with a welcome screen and "about this mac" should show the image to the left
-[* black] Note: I also replaced the DvD drive with a 256GB SSD which can be done easily during the installation process
-[* black] Last tip: if you remove the DvD drive for a SSD make a minimal bootcamp partition and install windows on it. It will save you a lot of trouble if you ever need one. Believe me, simply do it, installing bootcamp with no DvD drive is a pain.
+[* black] Reassemble the LCD display as explained on iFixit.
+[* black] No other work needs to be done. As you removed the power cable the SMC should reset, which is the chip configuring your hardware.
+[* black] If all goes well, you should be greeted with a welcome screen and "About This Mac" should show the image to the left.
+[* black] Note: I also replaced the optical drive with a 256GB SSD, which can be done easily during the installation process.
+[* black] Last tip: If you remove the optical drive for an SSD, make a minimal bootcamp partition and install Windows on it. It will save you a lot of trouble if you ever need one. Believe me, simply do it. Installing bootcamp with no optical drive is a pain.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0