crwdns2933423:0crwdne2933423:0

iPod Nano 1. Generation Akku Austausch

crwdns2936315:0crwdne2936315:0
crwdns2936319:0crwdne2936319:0
crwdns2931653:07crwdne2931653:0
iPod Nano 1st Generation Battery Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 iPod Nano 1st Generation Battery Replacement: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
  • In this step, you will solder the battery leads to the solder pads on the logic board.

  • Excess heat transferred to the logic board while soldering may result in electronic component damage. As a rule of thumb, hold the tip of the soldering iron against the joint just long enough to melt the solder, then quickly remove it.

  • Solder the connection by momentarily placing the tip of the soldering iron against the connection, melting solder into the connection, and quickly removing both the solder and the tip of the soldering iron from the connection. The solder should flow around the new battery lead, solidly connecting it to the pad on the logic board.

  • Solder the other two battery leads in the same fashion, taking care not to bridge any of the connections together.

In diesem Schritt werden die Akkukabel an die Lötstellen des Logic Boards gelötet.

Übermässige Hitze, die auf das Logic Board übertragen wird, während dem Löten, kann die elektronischen Komponenten beschädigen. Als Faustregel, halte die Spitze des Lötkolbens nur so lange an die Lötstelle bis der Lötzinn schmilzt, dann entferne sie schnell.

Löte die Verbindung, indem die Spitze kurzzeitig an die Verbindung gehalten wird, der Lötzinn in die Verbindung schmilzt und entferne die Spitze und den Lötzinn schnell wieder. Der Lötzinn sollte um das neue Akkukabel herumfließen und es fest an das Lötfeld des Logic-Boards befestigen.

Löte die zwei andern Akkukabel auf die gleichen Art und Weise und achte dabei darauf, dass sich die Verbindungen gegenseitig nicht berühren.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0