Samsung Camera LCD Replacement

crwdns2936071:01crwdne2936071:0

How to replace the LCD ribbon cable on a Samsung SMX 30F. This ribbon connects the LCD to the motherboard of the camera. For a change of LCD only the process is much simpler and only takes about ten minutes.

crwdns2936071:02crwdne2936071:0

Step 1: Remove the front block.

crwdns2936071:03crwdne2936071:0

Then gently pull on the block, be careful it is connected to the camera by rather short cables.

crwdns2936071:04crwdne2936071:0

Remove all screws by walking around the unit. Be careful some are hidden under the handle, behind the hatches ....

crwdns2936071:05crwdne2936071:0

To finish, remove the two screws connecting the screen to the body of the camera.

crwdns2936071:06crwdne2936071:0

Remove the case carefully, the cable disconnects easily from the very fragile connector.

crwdns2936071:07crwdne2936071:0

Remove the cable from the frame.

crwdns2936071:08crwdne2936071:0

When reassembling, first position the metal clip and the small magnet in the black housing, before putting it back on the metal shaft.