crwdns2933423:0crwdne2933423:0

iPhone 6s 电池更换

crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:03crwdne2931653:0
iPhone 6s Battery Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
  • Repeat for the second strip.

  • Hold down the battery as you remove the second strip, or the strip may fling the battery when it separates from the case.

  • If you removed both adhesive strips successfully, skip to step 29.

  • If either of the adhesive strips broke off underneath the battery and could not be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • Do not insert the spudger in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath. Do not pry against the logic board or you may damage the phone.

  • For alternative methods to unstick the battery, continue with the next step below.

重复一样的步骤, 将第二条胶带撕掉。

在你撕掉第二条胶带的同时, 请用手将电池固定住, 不然在你撕完胶带后, 电池可能会连同胶带一同被甩出。

如果你完整地撕掉两条胶带, 可跳过下个步骤。

如果任意一条胶带断裂, 而且电池仍然无法取下, 继续执行下一步骤。

[* black] Repeat for the second strip.
[* icon_caution] Hold down the battery as you remove the second strip, or the strip may fling the battery when it separates from the case.
-[* black] If you removed both adhesive strips successfully, skip to ***step 27***.
+[* black] If you removed both adhesive strips successfully, skip to ***step 29***.
[* icon_note] If either of the adhesive strips broke off underneath the battery and could not be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).
[* black] Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.
[* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
[* icon_caution] ***Do not*** insert the spudger in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath. ***Do not*** pry against the logic board or you may damage the phone.
[* icon_note] For alternative methods to unstick the battery, ***continue with the next step below***.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0