crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Sostituzione gruppo schermo LCD Nexus 7 2a generazione

crwdns2935425:01crwdne2935425:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936321:0crwdne2936321:0
crwdns2931653:01crwdne2931653:0
Nexus 7 2nd Generation LCD Screen Assembly Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0

  • Once you have removed the back cover, battery, daughterboard, motherboard, and speakers, the LCD assembly will remain.

  • Depending on your replacement, you may need to separate the housing frame from the LCD/digitizer.

  • To remove the LCD/digitizer, carefully heat the edge with a heat gun and use a thin blade to separate from the adhesive. Go slowly, and heat often, as the glass cracks very easily. Work around all of the edges and carefully pull the LCD/digitizer from the housing.

  • Some replacements do not include the foil switch assembly (top right in photo). If this is the case you will have to pry it gently off the old LCD assembly frame. On the new assembly watch the shape and the plastic guide pin. Alignment is important for the switches to work, once reassembled.

Una volta che hai rimosso la cover posteriore, la batteria, la scheda figlia, la scheda madre e gli altoparlanti, resta il gruppo LCD.

A seconda di come è fatta la tua parte sostitutiva, potrebbe essere necessario separare il telaio dall'LCD/digitizer.

Per rimuovere l'LCD/digitizer, scalda con cautela il bordo con una pistola termica e usa una lama sottile per tagliare l'adesivo. Procedi lentamente e riscalda spesso, perché il vetro si rompe molto facilmente. Attorno a tutti i bordi e tira fuori delicatamente l'LCD/digitizer dal suo alloggiamento.

[* black] Once you have removed the back cover, battery, daughterboard, motherboard, and speakers, the LCD assembly will remain.
[* icon_caution] Depending on your replacement, you may need to separate the housing frame from the LCD/digitizer.
[* icon_caution] To remove the LCD/digitizer, carefully heat the edge with a heat gun and use a thin blade to separate from the adhesive. Go slowly, and heat often, as the glass cracks very easily. Work around all of the edges and carefully pull the LCD/digitizer from the housing.
+[* black] Some replacements do not include the foil switch assembly (top right in photo). If this is the case you will have to pry it gently off the old LCD assembly frame. On the new assembly watch the shape and the plastic guide pin. Alignment is important for the switches to work, once reassembled.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0