crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Remplacement de l'écran LCD complet de la Nexus 7 2ème génération

crwdns2935425:01crwdne2935425:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936317:0crwdne2936317:0
crwdns2931653:01crwdne2931653:0
Nexus 7 2nd Generation LCD Screen Assembly Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0

  • Once you have removed the back cover, battery, daughterboard, motherboard, and speakers, the LCD assembly will remain.

  • Depending on your replacement, you may need to separate the housing frame from the LCD/digitizer.

  • To remove the LCD/digitizer, carefully heat the edge with a heat gun and use a thin blade to separate from the adhesive. Go slowly, and heat often, as the glass cracks very easily. Work around all of the edges and carefully pull the LCD/digitizer from the housing.

  • Some replacements do not include the foil switch assembly (top right in photo). If this is the case you will have to pry it gently off the old LCD assembly frame. On the new assembly watch the shape and the plastic guide pin. Alignment is important for the switches to work, once reassembled.

Une fois que vous avez démonté la coque arrière, la batterie, la carte fille, la carte mère et les haut-parleurs, il ne reste plus que l'ensemble écran LCD.

Selon votre pièce de rechange, vous devrez séparer le châssis de l'unité écran LCD/vitre tactile.

Pour retirer le bloc, faites soigneusement chauffer le bord avec un pistolet à air chaud et servez-vous d'une fine lame pour décoller l'adhésif. Travaillez lentement et refaites chauffer régulièrement, car la vitre est fragile. Progressez le long de tout le périmètre et ôtez délicatement l'unité écran LCD/vitre tactile du châssis.

[* black] Once you have removed the back cover, battery, daughterboard, motherboard, and speakers, the LCD assembly will remain.
[* icon_caution] Depending on your replacement, you may need to separate the housing frame from the LCD/digitizer.
[* icon_caution] To remove the LCD/digitizer, carefully heat the edge with a heat gun and use a thin blade to separate from the adhesive. Go slowly, and heat often, as the glass cracks very easily. Work around all of the edges and carefully pull the LCD/digitizer from the housing.
+[* black] Some replacements do not include the foil switch assembly (top right in photo). If this is the case you will have to pry it gently off the old LCD assembly frame. On the new assembly watch the shape and the plastic guide pin. Alignment is important for the switches to work, once reassembled.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0