crwdns2894164:0crwdne2894164:0
crwdns2876889:0crwdne2876889:0
crwdns2876898:0crwdne2876898:0
crwdns2894314:05crwdne2894314:0
You will now be able to see the linkage which is operated when you close the lid. The vertical section has 2 tabs which are a very loose fit in a vertical channel, causing it to jam all too easily.
  • You will now be able to see the linkage which is operated when you close the lid. The vertical section has 2 tabs which are a very loose fit in a vertical channel, causing it to jam all too easily.

  • Clean off any existing lubrication or dirt, and apply a very thin smear of silicone grease to the tabs or the sides of the channel. Check for smooth operation.

  • If this was the problem, you can now reassemble the printer, following the same procedure in reverse.

  • If the linkage is still not satisfactory, further disassembly as described in the following steps will gain you better access to it and the possibility of a more complete cure.

crwdns2869027:0crwdne2869027:0

crwdns2869027:0crwdne2869027:0

crwdns2869027:0crwdne2869027:0

crwdns2869027:0crwdne2869027:0

crwdns2859191:0crwdnd2859191:0crwdnd2859191:0crwdnd2859191:0crwdne2859191:0