crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

아이폰 5s 로직 보드 교체

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:07crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936325:0crwdne2936325:0
crwdns2931653:06crwdne2931653:0
iPhone 5s Logic Board Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0

  • Remove the following screws from the logic board:

  • One 2.4 mm Phillips #000 screw

  • This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to this step to remove it.

  • Two 2.3 mm Phillips #000 screws

  • Three 2.8 mm standoff screws

  • One 2.9 mm non-magnetic standoff screw

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

로직 보드에서 다음 나사들을 풀어주세요:

2.4mm 십자 #000 나사 한 개

이 나사는 로직 보드 바로 아래에 있는 작은 금속 접점도 고정합니다. 접점은 플라스틱 브래킷 아래에 고정되어 있지만, 만약 접점이 빠지는 것을 보이면 이 단계를 참조하여 분리하세요.

2.3mm 십자 #000 나사 두 개

2.8mm Standoff 나사 네 개

Standoff 나사들은 standoff 나사 드라이버 또는 비트를 이용하여 제거 하는것이 좋습니다.

급할 때에는 작은 일자 드라이버를 사용할 수도 있지만—미끄러져 주변의 부품들을 손상하지 않도록 주의하세요.

[* black] Remove the following screws from the logic board:
[* red] One 2.4 mm Phillips #000 screw
[* icon_reminder] This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to [guide|20246|this step|stepid=72613|new_window=true] to remove it.
[* orange] Two 2.3 mm Phillips #000 screws
- [* yellow] Four 2.8 mm standoff screws
+ [* yellow] Three 2.8 mm standoff screws
+ [* green] One 2.9 mm non-magnetic standoff screw
[* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0