crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Separación de la caja electrónica del Behringer Eurolive B212D

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:04crwdnd2931529:0crwdne2931529:0

crwdns2935423:0crwdne2935423:0

crwdns2935425:01crwdne2935425:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936331:0crwdne2936331:0
crwdns2931653:01crwdne2931653:0
Detach the Behringer Eurolive B212D Electronics Box: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Detach the Behringer Eurolive B212D Electronics Box: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Detach the Behringer Eurolive B212D Electronics Box: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0

  • There are two silver, 6 mm-long machine screws with two 1/8" inner-diameter washers on the exterior of the metal electronics box; remove these first using a #2 philips screwdriver.

  • There are five of the same type of machine screw (silver, 6 mm-long) remaining around the metal electronics box's exterior; remove these as well.

  • You should have removed a total of 7 machine screws and 2 washers.

  • The reason for removing the two screws with the two washers first (or replacing them last when reassembling) is that their holes are actually slots. They are designed as slots to accommodate slop in the assembly, and if unscrewed out of order, you may have difficulty while removing - or possibly even damage - the other five screws.

Hay dos tornillos para máquina plateados de 6 mm de largo con dos arandelas de diámetro interno de 1/8" en el exterior de la caja electrónica de metal; retírelos primero usando un destornillador Phillips #2.

Quedan cinco tornillos para máquina del mismo tipo (plateados, de 6 mm de largo) alrededor del exterior de la caja electrónica de metal; retírelos también.

Deberías haber quitado un total de 7 tornillos de máquina y 2 arandelas.

La razón para quitar primero los dos tornillos con las dos arandelas (o reemplazarlos al final al reensamblar) es que sus orificios son en realidad ranuras. Están diseñadas como ranuras para acomodar la holgura del ensamblaje, y si se desatornillan incorrectamente, podría tener dificultades para quitar, o incluso dañar, los otros cinco tornillos.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0