crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

iPhone 16 Pro Max Logic Board tauschen

crwdns2931527:0crwdnd2931527:0crwdnd2931527:0crwdnd2931527:0crwdne2931527:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936319:0crwdne2936319:0
crwdns2931653:08crwdne2931653:0
iPhone 16 Pro Max Logic Board Removal, Remove the logic board: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 iPhone 16 Pro Max Logic Board Removal, Remove the logic board: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 iPhone 16 Pro Max Logic Board Removal, Remove the logic board: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Remove the logic board

  • If your iPhone has a physical SIM tray, eject it before you proceed.

  • Make sure all the connectors are disconnected from the top of the logic board.

  • Insert the flat edge of an opening pick between the battery and the left edge of the logic board. Hold the pick in place with your fingers.

  • Insert the flat end of a spudger underneath the right edge of the logic board.

  • Gently pry with the spudger to lift the logic board and disconnect the display connector.

  • Don't remove the logic board yet. There's still a cable connected to the bottom side.

Logic Board entfernen

Setze ein Plektrum mit der flachen Kante zwischen den Akku und dem Logic Board ein. Halte es mit den Fingern fest.

Setze einen Spudger mit mit dem flachen Ende unter die rechte Kante des Logic Boards.

Hebe das Logic Board behutsam mit dem Spudger hoch und trenne den Displaystecker ab.

Entferne das Logic Board noch nicht. Es ist auf der Unterseite noch mit einem Kabel angeschlossen.

Klappe des Logic Board um, achte aber darauf, dass das Kabel nicht zu stark angespannt wird.

[title] Remove the logic board
[* icon_caution] ***If your iPhone has a physical SIM tray, eject it before you proceed.***
[* icon_caution] Make sure all the connectors are disconnected from the top of the logic board.
-[* black] Insert the flat edge of an opening pick between the battery and the logic board. Hold the pick in place with your fingers.
+[* black] Insert the flat edge of an opening pick between the battery and the left edge of the logic board. Hold the pick in place with your fingers.
[* black] Insert the flat end of a spudger underneath the right edge of the logic board.
-[* black] Gently pry with the spudger to lift the logic board and disconnect the screen connector.
+[* black] Gently pry with the spudger to lift the logic board and disconnect the display connector.
[* icon_caution] Don't remove the logic board yet. There's still a cable connected to the bottom side.
-[* black] Flip the logic board over, being careful not to strain the connected cable.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0