crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

如何焊接和拆焊

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:011crwdne2931653:0
How To Solder and Desolder Connections, Advanced Guide: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
Advanced Guide

  • For the last section, battery leads will be soldered to surface-mount solder pads. These type of joints are harder to solder because the lead has no solid anchor point (such as a thru-hole) to hold it in place during soldering.

  • To de-solder the joint, place a solder wick on top of the existing solder ball and press down on the solder wick with the soldering iron.

  • Once the solder melts and flows into the wick, remove the wick from the joint.

  • Repeat the same procedure on the remaining leads.

  • When a section of solder wick is saturated with solder, it should be trimmed and discarded.

高级指南

对于最后一部分，电池引线将焊接到表面贴装焊盘。 这些类型的接头难以焊接，因为引线在焊接过程中没有固定的锚定点（例如通孔）将其固定到位。

要焊接接头，将吸锡线放在现有焊球的顶部，然后用烙铁将吸锡线向下压。

一旦焊料熔化并流入吸锡线，从接头上取下吸锡线。

对剩余的引线重复相同的步骤。

当一段吸锡线被焊料充满后，应对其进行修整和丢弃。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0