Cherry Gentix 4K Maus - Disassembly

crwdns2936071:01crwdne2936071:0

Remove the "Q.C. Passed" Sticker to have access to the Phillips screw below.

crwdns2936071:02crwdne2936071:0

Remove the three Phillips screws.

crwdns2936071:03crwdne2936071:0

Lift the upper part of the mouse.

crwdns2936071:04crwdne2936071:0

Loose the plug with the flat end of a spudger.

crwdns2936071:05crwdne2936071:0

Lift the two side parts and put it aside.

crwdns2936071:06crwdne2936071:0

Loose the plug with the flat end of a spudger.

crwdns2936071:07crwdne2936071:0

There are two plasic clips. Loose the left plastic clip very carefully.

crwdns2936071:08crwdne2936071:0

Move the mouse wheel a bit to the right.

crwdns2936071:09crwdne2936071:0

Reference picture of the board.

crwdns2936071:010crwdne2936071:0

Remove the four Phillips Screws.

crwdns2936071:011crwdne2936071:0 — optional for cleaning

Have a look at the plastic clips

crwdns2936071:012crwdne2936071:0

Insert the flat end of the spudger into the gap between the two halves on the left and right. The rear plastic clips should then release automatically.

crwdns2936071:013crwdne2936071:0

Loose the plastic clips in the middle.

crwdns2936071:014crwdne2936071:0

Insert the flat end of a spudger into the gap between the two parts.

crwdns2936071:015crwdne2936071:0

Unlock the two plastic clips.

crwdns2936071:016crwdne2936071:0

Overview of all parts.