crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Extracción de la placa lógica

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:07crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936331:0crwdne2936331:0
crwdns2931653:07crwdne2931653:0
Logic Board Removal: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Logic Board Removal: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Logic Board Removal: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0

  • Be very careful not to puncture the battery during this step.

  • Hold one hand above the display bracket when prying it up, as the bracket can easily eject.

  • Use the tip of one arm of your angled tweezers to pry up the top edge of the display cable bracket from the center of the logic board.

  • Be very careful not to damage the board under the bracket's socket. Only insert your tweezers just enough to pry up the bracket.

  • Remove the bracket.

  • During reassembly, hook the bottom edge of the bracket into its slot on the logic board and press down firmly on the top to snap the bracket back into place.

  • If your display cable bracket is bent and doesn't fit, replace it with a new one.

Ten mucho cuidado de no pinchar la batería durante este paso.

Mantén una mano por encima del soporte de la pantalla cuando hagas palanca, ya que el soporte puede salir despedido con facilidad.

Utiliza la punta de un brazo de tus pinzas anguladas para hacer palanca y levantar el borde superior del soporte del cable de la pantalla del centro de la placa lógica.

Ten mucho cuidado de no dañar la placa situada bajo el zócalo del soporte. Introduce las pinzas sólo lo suficiente para hacer palanca en el soporte.

Retira el soporte.

Durante el reensamblaje, engancha el borde inferior del soporte en su ranura de la placa lógica y presiona firmemente en la parte superior para que el soporte vuelva a encajar en su sitio.

[* icon_caution] Be ''very'' careful not to puncture the battery during this step.
[* icon_caution] Hold one hand above the display bracket when prying it up, as the bracket can easily eject.
[* black] Use the ''tip'' of one arm of your angled tweezers to pry up the top edge of the display cable bracket from the center of the logic board.
[* icon_caution] Be very careful not to damage the board under the bracket's socket. Only insert your tweezers just enough to pry up the bracket.
[* black] Remove the bracket.
[* icon_reminder] During reassembly, hook the bottom edge of the bracket into its slot on the logic board and press down firmly on the top to snap the bracket back into place.
+ [* icon_note] If your display cable bracket is bent and doesn't fit, replace it with a [product|IF356-433|new one|new_window=true].

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0