Remove the Pen (if present).

Remove the three (3) plastic screw covers using a hobby knife. Insert the blade so its just underneath the cover, then use the back of the knife to remove to prevent cutting the cover. Then, remove the three (3) M2x8mm Philips screws.

Remove the single (1) plastic screw cover as detailed above. Then remove the single (1) M2x5mm Philips screw.

Remove the IBM ThinkPad decal using a similar technique to the screw covers, revealing a single (1) M2x8mm Philips screw. Remove to continue.

To loosen the bezel, insert a plastic pick underneath the left display latch at the top of the pen slot. Then, using a second pick, begin dislodging the clips along the top of the bezel until it pops off.

Tilt the bezel towards you, being careful not to stress the clips securing the bottom, and remove.