crwdns2933423:0crwdne2933423:0

Kobo Libra Colour 主板更换

crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:03crwdne2931653:0
Kobo Libra Colour Motherboard Replacement, Disconnect the interconnect cable: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Kobo Libra Colour Motherboard Replacement, Disconnect the interconnect cable: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Kobo Libra Colour Motherboard Replacement, Disconnect the interconnect cable: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Disconnect the interconnect cable
  • Use the tip of a spudger to lift up the locking tab on the ZIF connector.

  • Use tweezers, or your fingers, to grip the blue pull tab on the interconnect cable and disconnect it.

  • During reassembly:

  • Inspect the ends of the cable and the ZIF connectors for any remaining coating that could prevent a good connection.

  • Peel off the coating, heating the cable and the ZIF connector when the coating becomes too brittle.

  • It doesn't have to look pretty! You just need to remove enough coating to have the cable sit properly in the connector.

用撬棒尖撬起 ZIF 接口上的锁片。

用镊子或手指夹住互连排线上的蓝色拉片,然后断开连接。

在重新组装过程中:

检查排线两端和 ZIF 接口是否有任何残留涂层,以免影响连接。

剥离涂层,在涂层变得太脆时加热排线和 ZIF 接口。

不用力求完美!您只需去除足够的涂层,让排线正确地插入接口即可。

[title] Disconnect the interconnect cable
[* black] Use the tip of a spudger to lift up the locking tab on the ZIF connector.
-[* black] Use tweezers, or your fingers, to grip the blue pull tab on the interconnect cable and disconnect it.
+[* black] Use [product|IF145-020|tweezers], or your fingers, to grip the blue pull tab on the interconnect cable and disconnect it.
[* icon_reminder] During reassembly:
[* black] Inspect the ends of the cable and the ZIF connectors for any remaining coating that could prevent a good connection.
[* black] Peel off the coating, heating the cable and the ZIF connector when the coating becomes too brittle.
[* icon_note] It doesn't have to look pretty! You just need to remove enough coating to have the cable sit properly in the connector.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0