crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

MacBook Pro 14" Ende 2023 (M3) Logic Board entfernen

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:04crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936319:0crwdne2936319:0
crwdns2931653:020crwdne2931653:0
MacBook Pro 14" Late 2023 (M3) Logic Board Removal, Unfasten the logic board: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 MacBook Pro 14" Late 2023 (M3) Logic Board Removal, Unfasten the logic board: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
Unfasten the logic board

  • Use a T6 Torx driver to remove the three screws along the top and left edges:

  • Two 4.6 mm-long screws

  • One 5.6 mm-long screw

  • Use your 5IP Torx Plus driver to remove the eight screws along the right edge, bottom edge, and fan:

  • Two 3.8 mm-long screws with silver screw heads

  • Two 3.7 mm-long screws with small, black screw heads

  • Two 5.1 mm-long screws

  • Two 3.6 mm-long screws along the left edge of the fan

Logic Board losschrauben

Nimm einen Torx T6 Schraubendreher und entferne die drei 6IP Torx Plus Schrauben, an der Oberkante und der linken Seitenkante.

Zwei 4,6 mm langen Schrauben

Eine 5,6 mm lange Schraube

Nimm einen Torx T5 Schraubendreher und entferne die acht 5IP Torx Plus Schrauben, an der rechten Seitenkante, der Unterkante und am Lüfter:

Zwei 3,8 mm lange Schrauben mit silbernen Schraubenköpfen

Zwei 3,7 mm lange Schrauben mit kleinen schwarzen Schraubenköpfen

Zwei 5,1 mm lange Schrauben

Zwei 3,6 mm lange Schrauben an der linken Kante des Lüfters

[title] Unfasten the logic board
-[* black] Use a T6 Torx driver to remove the three 6IP Torx Plus screws along the top and left edges:
+[* black] Use a T6 Torx driver to remove the three screws along the top and left edges:
[* red] Two 4.6 mm-long screws
[* orange] One 5.6 mm-long screw
-[* black] Use your T5 Torx driver to remove the eight 5IP Torx Plus screws along the right edge, bottom edge, and fan:
+[* black] Use your 5IP Torx Plus driver to remove the eight screws along the right edge, bottom edge, and fan:
[* yellow] Two 3.8 mm-long screws with silver screw heads
[* green] Two 3.7 mm-long screws with small, black screw heads
[* light_blue] Two 5.1 mm-long screws
[* blue] Two 3.6 mm-long screws along the left edge of the fan

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0