crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

MacBook Pro 16" (Ende 2023) Kühlkörper tauschen

crwdns2931527:0crwdnd2931527:0crwdnd2931527:0crwdnd2931527:0crwdne2931527:0

crwdns2935423:0crwdne2935423:0

crwdns2935425:01crwdne2935425:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936319:0crwdne2936319:0
crwdns2931653:01crwdne2931653:0
MacBook Pro 16" Late 2023 Heat Sink Replacement, Unfasten the heat sink: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 MacBook Pro 16" Late 2023 Heat Sink Replacement, Unfasten the heat sink: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
Unfasten the heat sink

  • Turn the logic board upside-down so that the heat sink screws face upwards.

  • Use a 5IP Torx Plus driver to remove the four 3.9 mm screws securing the heat sink to the logic board.

  • Gently hold the screws as you remove them, as the tension brackets may eject them.

  • During reassembly, loosely tighten these screws, then align the brackets and heatsink before fully tightening them in an X-pattern.

Kühlkörper losschrauben

Drehe das Logic Board um, so dass die Schrauben des Kühlkörpers nach oben zeigen.

Entferne die vier 3,9 mm Torx T5 Schrauben, mit denen der Kühlkörper an dem Logic Board befestigt ist.

Halte die Schrauben beim Entfernen behutsam fest, sie können sonst durch die Spannhalter herausgeschleudert werden.

Ziehe diese Schrauben beim Zusammenbau erst lose an. Richte dann die Halter und den Kühlkörper aus, bevor du sie über Kreuz festziehst.

[title] Unfasten the heat sink
[* black] Turn the logic board upside-down so that the heat sink screws face upwards.
-[* red] Use a T5 Torx driver to remove the four 3.9 mm screws securing the heat sink to the logic board.
+[* red] Use a 5IP Torx Plus driver to remove the four 3.9 mm screws securing the heat sink to the logic board.
[* icon_caution] Gently hold the screws as you remove them, as the tension brackets may eject them.
[* icon_reminder] During reassembly, loosely tighten these screws, then align the brackets and heatsink before fully tightening them in an X-pattern.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0