crwdns2935355:0devicecrwdnd2935355:0crwdnd2935355:0crwdne2935355:0
crwdns2935335:0crwdne2935335:0
crwdns2935381:0crwdne2935381:0
crwdns2936071:01crwdne2936071:0 — Put your laptop down somewhere accessible
Place a soft non-slip mat under the laptop and place the laptop with the lid up.
crwdns2936071:02crwdne2936071:0 — Unscrew the screws
Using a Phillips screwdriver from the Xiaomi Mija set, unscrew all the screws
crwdns2936071:03crwdne2936071:0 — Removing the back cover
Carefully, starting from the lower right corner, we begin to unclip the clips off the back cover and, as a result, we can remove it.
crwdns2936071:04crwdne2936071:0 — Removing the battery off the motherboard
MUST!!!! Turn off the power to the laptop from the built-in battery by slightly prying the chip on both sides using a credit card.
crwdns2936071:05crwdne2936071:0 — Sticker removal
Partially peel off the sticker above the RAM ports.
crwdns2936071:06crwdne2936071:0 — Removing old RAM
Unclip the clips holding the RAM (away from the RAM stick) and remove both sticks of RAM.
crwdns2936071:07crwdne2936071:0 — Unboxing the new RAM
Opening new RAM. Put it in a convenient and accessible place on the table.
crwdns2936071:08crwdne2936071:0 — Installing new RAM
Carefully install new RAM into the ports. Snap by pressing both corners of the bar at the same time.
crwdns2936071:09crwdne2936071:0 — Put the sticker back on
Return the sticker back and smooth it with our finger along the middle of the sticker (glue line).
crwdns2936071:010crwdne2936071:0 — Return power to laptop
Using a credit card and your hand, carefully place the chip back into the battery.
crwdns2936071:011crwdne2936071:0 — Housing Assembly
We return the cover to its rightful place and, according to the photo, tighten the screws with light force into the laptop.
crwdns2936071:012crwdne2936071:0 — Launch bios
We start the laptop with the PWR button and when the ASUS logo appears, press the F2 button to enter the BIOS.
crwdns2936071:013crwdne2936071:0 — Entering Diagnostic Mode
Already in the main BIOS menu, our RAM strips are initialized, press the F7 button or select the advanced settings item in the lower right corner. Then click ASUS System Diagnostics.
crwdns2936071:014crwdne2936071:0 — RAM test
Once in the diagnostics menu, select RAM - diagnostics of RAM. Next, select 100% in the drop-down window and wait for the verification to complete. If successful, you will receive a window like this.
crwdns2936071:015crwdne2936071:0 — Congratulations!
Congratulations, you have successfully upgraded the RAM on your laptop! This cake is for you!
crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0