宝丽来 I-2 后盖移除

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:07crwdnd2931529:0crwdne2931529:0

crwdns2935425:08crwdne2935425:0

crwdns2936315:0crwdne2936315:0

crwdns2936311:0crwdne2936311:0

crwdns2931653:08crwdne2931653:0

Reposition the back cover

Don't try to pull the back cover off just yet, as it's still connected by a cable.
At this point, the back cover should feel loose. If any parts still feel connected, repeat the last four steps until all the clips release.
Pull the back cover off the camera and rotate it over the right edge to expose the flex cable.
During reassembly, make sure the the flex cable isn't caught between the covers before re‑engaging the clips.

将后盖放到一边

先不要尝试拉开后盖，因为它还由线缆连接着。
此时，后盖应感觉松动。如果任何部件仍有连接的感觉，请重复最后四个步骤，直到所有卡扣都松开。
将后盖从相机上拉下，然后旋转到右侧边缘，露出柔性排线。
重新装配时，在重新啮合卡扣之前，确保柔性排线没有卡在盖板之间。

	[title] Reposition the back cover
	[* icon_caution] Don't try to pull the back cover off just yet, as it's still connected by a cable.
	[* icon_note] At this point, the back cover should feel loose. If any parts still feel connected, repeat the last four steps until all the clips release.
	[* black] Pull the back cover off the camera and rotate it over the right edge to expose the flex cable.
-	[* icon_reminder] During reassembly, make sure the the flex cable isn't caught between the covers before re-engaging the clips.
+	[* icon_reminder] During reassembly, make sure the the flex cable isn't caught between the covers before re‑engaging the clips.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0